Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

1. INSTALL FRONT BUMPER SIDE RETAINER LH

(a) Engage the claw and install the front bumper side retainer LH.





(b) Install the screw.

2. INSTALL FRONT BUMPER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Install the front bumper reinforcement sub-assembly with the 6 bolts.





Torque : 34 Nm (347 kgf-cm, 25 ft-lbf)

(b) Engage the 6 clamps.

4. INSTALL FRONT BUMPER ENERGY ABSORBER

(a) Engage the 2 guides and install the front bumper energy absorber to the front bumper reinforcement sub-assembly.





5. INSTALL RADIATOR GRILLE EMBLEM

(a) Engage the 4 claws and install the radiator grille emblem.





6. INSTALL FRONT BUMPER UPPER RETAINER

(a) Install the front bumper upper retainer with the 3 clips.





7. INSTALL HOOD TO FRONT END PANEL SEAL

(a) Apply new double-sided tape to the hood to front end panel seal.





(b) Remove the release paper from the hood to front end panel seal.

(c) Install the hood to front end panel seal with the 10 clips.

8. INSTALL RADIATOR GRILLE

(a) Engage the 15 claws and install the radiator grille.





(b) Install the 2 screws.

9. INSTALL LOWER RADIATOR GRILLE

(a) Engage the 14 claws and install the lower radiator grille.





10. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

(a) Engage the 5 claws and install the front bumper hole cover LH.





11. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT
Use the same procedure for the RH side and LH side.

12. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)

(a) Engage the 5 claws and install the front bumper hole cover LH.





13. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation

14. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.

15. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.

16. INSTALL FRONT BUMPER LOWER COVER (w/ Cover)

(a) Engage the 2 claws to install the front bumper lower cover.





17. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)

(a) Engage the 2 claws and install the front bumper extension mounting bracket.





(b) Install the 2 screws.

18. INSTALL FRONT BUMPER EXTENSION LH (w/ Front Spoiler)

(a) Install the front bumper extension LH with the 2 nuts.





19. INSTALL FRONT BUMPER EXTENSION RH (w/ Front Spoiler)

HINT
Use the same procedure for the RH side and LH side.

20. INSTALL FRONT SPOILER (w/ Front Spoiler)

(a) Install the 23 clips.





(b) Install the front spoiler with 2 screws.