Removal (from 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Precaution (from 12/2010).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE FRONT SEAT ASSEMBLY Removal (from 12/2010)

4. REMOVE RECLINING POWER SEAT SWITCH KNOB Disassembly (from 12/2010)

5. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Disassembly (from 12/2010)

6. REMOVE FRONT SEAT CUSHION SHIELD INNER NO.1 LH Disassembly (from 12/2010)

7. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR

(a) Remove the seat slide position sensor protector from the seat position sensor.





8. REMOVE SEAT POSITION SENSOR

(a) Disconnect the connector from the seat position sensor.

(b) Using a "torx" socket wrench (T30), remove the "torx" screw and the seat position sensor.