Removal (from 12/2010)

BRAKE CONTROL: VSC OFF SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal (from 12/2010)

3. REMOVE INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System) Removal (from 12/2010)

4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal (from 12/2010)

5. REMOVE VSC OFF SWITCH

(a) Disengage the 2 claws and remove the VSC OFF switch.