Installation (from 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

2. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY

(a) Connect the 2 connectors to the front passenger airbag assembly.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the clip.

3. INSTALL NO. 3 HEATER TO REGISTER DUCT Reassembly (from 12/2010)

4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly (from 12/2010)

5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation (from 12/2010)

6. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

7. INSTALL TIRE PRESSURE MONITOR ECU

Installation (from 12/2010)

8. INSPECT SRS WARNING LIGHT

Diagnosis System (from 12/2010)