Removal (from 12/2010)

AUDIO / VISUAL: NETWORK GATEWAY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal (from 12/2010)

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal (from 12/2010)

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal (from 12/2010)

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal (from 12/2010)

6. REMOVE NETWORK GATEWAY ECU

(a) Disconnect the connector.





(b) Disengage the 2 claws and remove the ECU aggregation cover.

(c) Remove the network gateway ECU assembly as shown in the illustration.