Headlight Beam Level Control Actuator Circuit

LIGHTING: LIGHTING SYSTEM: Headlight Beam Level Control Actuator Circuit
- Headlight Beam Level Control Actuator Circuit

DESCRIPTION

The headlight beam level control motor receives signals from the headlight beam level control ECU to operate. The headlight beam level control ECU receives signals regarding operating conditions of the headlight beam level control motor.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (HEADLIGHT BEAM LEVEL CONTROL MOTOR - ECU)

(a) Disconnect the headlight assembly connector on the headlight beam level control motor side and the headlight beam level control ECU connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:

LH Side
RH Side










NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. INSPECT HEADLIGHT BEAM LEVEL CONTROL MOTOR

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:

LH Side
RH Side










HINT
Measure the resistance after the headlight has cooled down.

NG -- REPLACE HEADLIGHT BEAM LEVEL CONTROL MOTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE