Installation

2GR-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL THERMOSTAT

(a) Install a new gasket to the thermostat.





(b) Install the thermostat with the jiggle valve facing up.

HINT
The jiggle valve may be set within 10°of either side of the prescribed position.

2. INSTALL WATER INLET

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

3. INSTALL RADIATOR HOSE OUTLET

4. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

5. INSTALL FAN & GENERATOR V BELT

6. INSTALL ENGINE MOUNTING BRACKET FRONT NO.1 LH

7. INSTALL ENGINE MOUNTING CONTROL BRACKET

8. INSTALL ENGINE MOVING CONTROL ROD

9. INSTALL V-BANK COVER SUB-ASSEMBLY

10. ADD ENGINE COOLANT

11. INSPECT FOR COOLANT LEAK