Removal (to 12/2010)

BRAKE: BRAKE PEDAL: REMOVAL

NOTICE:
Release the vacuum from the booster by depressing the brake pedal several times. Then remove the brake master cylinder from the brake booster.

1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

Removal (to 12/2010)

2. REMOVE COMBINATION METER ASSEMBLY

Removal (to 12/2010)

3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH Removal

4. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH Removal

5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

7. REMOVE COWL TOP PANEL OUTER Removal (to 12/2010)

8. DRAIN BRAKE FLUID

9. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal (to 12/2010)

10. REMOVE AIR CLEANER CASE Removal (to 12/2010)

11. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY Removal (to 12/2010)

12. DISCONNECT VACUUM HOSE Removal (to 12/2010)

13. REMOVE BRAKE PEDAL RETURN SPRING Removal (to 12/2010)

14. REMOVE PUSH ROD PIN Removal (to 12/2010)

15. REMOVE BRAKE BOOSTER ASSEMBLY Removal (to 12/2010)

16. REMOVE BRAKE BOOSTER GASKET Removal (to 12/2010)

17. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

18. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Headlight Leveling) Removal

19. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

(a) Disconnect the stop light switch connector and wire harness clamp.





(b) Remove the 2 bolts and brake pedal support sub-assembly.