Disassembly

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR: DISASSEMBLY

HINT
* The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

(a) Using a clip remover, remove the 13 clips and the luggage compartment door cover.





2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Disengage the 2 claws and remove the cover.





(b) Disconnect the connector and control cable.

(c) Remove the 2 bolts and the luggage compartment door lock assembly.





3. REMOVE LUGGAGE COMPARTMENT DOOR PANEL CUSHION LH

(a) Remove the bolt and luggage compartment door panel cushion LH.





4. REMOVE LUGGAGE COMPARTMENT DOOR PANEL CUSHION RH

(a) Remove the bolt and luggage compartment door panel cushion RH.





5. REMOVE LUGGAGE COMPARTMENT DOOR CUSHION

(a) Remove the 2 claws and 2 luggage compartment door cushions.





6. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

(a) Remove the 2 clips and luggage compartment door hinge cover LH.





7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

(a) Remove the 2 clips and luggage compartment door hinge cover RH.





8. REMOVE LUGGAGE COMPARTMENT INSIDE DOOR HANDLE

9. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

10. REMOVE REAR LIGHT ASSEMBLY LH Removal

11. REMOVE REAR LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

12. REMOVE LICENSE PLATE LIGHT ASSEMBLY Removal

13. REMOVE TELEVISION CAMERA ASSEMBLY Removal