Front Drive Shaft Assembly

DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY: INSPECTION

1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

(a) Check whether the drive shaft dimensions are within the following specifications.





HINT
The following table shows the dimension (A) of the drive shaft.

Dimension (A) for 1AR-FE

Dimension (A) for 1AR-FE:

Dimension (A) for 2GR-FE

Dimension (A) for 2GR-FE:

(b) Check that there is no excessive play in the outboard joint.





(c) Check that the inboard joint slides smoothly in the thrust direction.

(d) Check that there is no excessive play in the radial direction of the inboard joint.

(e) Check the boots for damage.