Removal

REAR SUSPENSION: REAR STRUT ROD: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL

2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the bolt and separate the No. 3 parking brake cable assembly.





3. REMOVE REAR STRUT ROD ASSEMBLY (for 2WD)

(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.





NOTICE:
Since stopper nuts are used, loosen the bolts.

4. REMOVE REAR STRUT ROD ASSEMBLY (for AWD)

(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly.





NOTICE:
Since stopper nuts are used, loosen the bolts.