Removal

FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: REMOVAL

HINT
* Use the same procedure for the LH side and RH side.
* The following procedure listed below is for the LH side.
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)

HINT
Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)

HINT
Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

3. REMOVE FRONT NO. 1 STABILIZER BRACKET LH (for AWD) Removal

4. REMOVE FRONT NO. 1 STABILIZER BRACKET RH (for AWD)

HINT
Perform the same procedure as the LH side.

5. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY (for AWD)

6. REMOVE STEERING LINK ASSEMBLY (for AWD) Removal

7. REMOVE FRONT FRAME ASSEMBLY (for 2GR-FE) Removal

8. SEPARATE REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) Removal

9. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) Removal

10. REMOVE ENGINE MOUNTING INSULATOR LH (for 2GR-FE) Removal

11. REMOVE ENGINE MOUNTING INSULATOR LH (for 1AR-FE) Removal

12. REMOVE FRONT LOWER SUSPENSION ARM

(a) Remove the 3 bolts, nut and front lower suspension arm from the front frame assembly.





(b) Remove the front lower arm bushing stopper from the front lower suspension arm.