Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connectors.





(b) Install the combination meter assembly with the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL

(a) Engage the 3 claws.





(b) Install the instrument cluster finish panel with the 2 clips.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL UPPER STEERING COLUMN COVER Installation

5. INSTALL LOWER STEERING COLUMN COVER Installation