Removal

POWER STEERING: VANE PUMP:

COMPONENTS





REMOVAL

NOTICE:
- When using a vise, do not overtighten.
- When installing, coat the parts indicated by the arrows with power steering fluid.

1. REMOVE FRONT WHEEL RH
2. DRAIN POWER STEERING FLUID
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE FAN AND GENERATOR V BELT
5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1
(a) Remove the clip and disconnect the oil reservoir to pump hose No. 1.
6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY





(a) Using SST, disconnect the pressure feed tube assembly.
SST: 09023-38401
(b) Remove the bolt and disconnect the pressure feed tube clamp.
7. REMOVE VANE PUMP ASSEMBLY





(a) Disconnect the oil pressure switch connector.
(b) Remove the 2 bolts, nuts and vane pump assembly.