Hood Removal and Installation

Hood Removal and Installation

Removal

NOTE:

Hood removal and installation operations could damage the body areas surrounding the hood unless they are properly protected.

Use pieces of cloth as necessary to protect the body surfaces from damage.

1) Remove hood silencer (4).
2) Disconnect window washer hose (1) from hood.
3) Remove 4 mounting bolts (3) to detach hood (2).

Installation

Hood Inspection and Adjustment

Reverse removal procedure noting the following.

- Apply sealant to contact face "A" of hood hinge.
Specified sealant.

"A" Sealant: 99000-31110 (SUZUKI Bond No.1215)

- Adjust hood lock position if necessary referring to Hood Inspection and Adjustment Hood Inspection and Adjustment.