Suspension Arm Inspection

Suspension Arm Inspection

Suspension Arm Removal and Installation

Suspension Arm

Inspect suspension arm (1) for damage and deformation. Replace suspension arm if defective.

Bushing

Inspect bushing (2) for damage, wear and deformation. Replace suspension arm if defective.





Suspension Arm Joint

- Inspect ball stud (1) for stickiness, damage and run-out. Replace suspension arm if defective.
- Inspect suspension arm joint dust cover (2) for cracks and damage. Replace suspension arm joint dust cover (2) with new one, if defective. Front Suspension

NOTE:

Suspension arm and arm joint cannot be separated.