P/S Warning Light Does Not Come ON with Ignition Mode Change to "ON" before Engine Starts

P/S Warning Light Does Not Come ON with Ignition Mode Change to "ON" before Engine Starts

Circuit Diagram










Troubleshooting


1. Was "P/S System Check" performed?
YES
Go to Step 2.
NO
Go to P/S System Check P/S System Check.
2. Scan tool parameter check
Select "Indicator" function in "Active Test".
Does P/S warning light come ON?
YES
Perform Troubleshooting for Lost Communication Troubleshooting for Lost Communication.
NO
Perform Combination Meter Diagnosis Combination Meter Diagnosis.

NOTE:

Perform following items after completion of check and repair.

- Connect every P/S system component and check if installed securely.
- Recheck system to see there is no error. P/S System Check