DTC Clearance

DTC Clearance

1) Confirm that ignition mode of keyless push start system is in "OFF".
2) Connect SUZUKI scan tool to DLC (1) located around bottom at driver's seat side.
Special Tool

(A): SUZUKI scan tool (SUZUKI-SDT)





3) Push engine switch to change ignition mode of keyless push start system to "ON".
4) Clear DTC according to instructions displayed on SUZUKI scan tool. For further details, refer to operator's manual for SUZUKI scan tool.
5) Push engine switch to change ignition mode of keyless push start system to "OFF" and disconnect SUZUKI scan tool from DLC after completing clearance.