"EPS" Warning Light Does Not Come On With Ignition Switch Turned On Before Engine Starts

"EPS" Warning Light Does Not Come ON with Ignition Switch Turned ON before Engine Starts

Wiring Diagram








Circuit Description
Operation (ON/OFF) of "EPS" warning light is controlled by P/S control module through combination meter.
If the P/S system is in good condition, P/S control module turns "EPS" warning light ON at the ignition switch ON, and then turns it OFF at the engine start. If an abnormality in the system is detected, "EPS" warning light is turned ON continuously by P/S control module. If P/S control module is disconnected, "EPS" warning light is not turned ON.

Troubleshooting

Step 1-5:

Step 5-6: