P0967

DTC P0966 / P0967

DTC Detecting Condition and Trouble Area





Wiring Diagram
Refer to DTC P0741. P0741

DTC Confirmation Procedure

P0966

NOTE:
Check that the following conditions are satisfied when using this procedure.
^ Battery voltage > 10.5 V

1) Turn ignition switch to ON position for 10 sec.

P0967

NOTE:
^ If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
^ Check that the following conditions are satisfied when using this procedure.
- Battery voltage > 10.5 V

1) Turn ignition switch to ON position for 10 sec.

DTC Troubleshooting

Step 1-3: