P0843

DTC P0842 / P0843

DTC Detecting Condition and Trouble Area





Wiring Diagram
Refer to DTC P0641. P0641

DTC Confirmation Procedure

P0842 / P0843

NOTE:
^ If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
^ Check that the following conditions are satisfied when using this procedure.
- Battery voltage > 10.5 V
- CVT fluid temperature at engine start >/= -20 °C (-4 °F)

1) Turn ignition switch to ON position for 10 sec.

DTC Troubleshooting

Step 1-2:

Step 3-4: