P0464

DTC P0464: Fuel Level Sensor Circuit Intermittent

Wiring Diagram:

DTC Detecting Condition And Trouble Area:

DTC Confirmation Procedure

NOTE:
Check to make sure that the following conditions are satisfied when using this DTC confirmation procedure.
- Intake air temp.: -14 °C, 6.8 °F or higher
- Altitude (barometric pressure): 2400 m, 8000 ft or less (560 mmHg, 75 kPa or more)

1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Start engine and run it for 30 sec. or more.
4. Check DTC and pending DTC.

Step 1 - 6:

Step 6 - 10:

Step 10 - 13:

DTC Troubleshooting