DTC ED

DTC ED SIDE SENSOR BUS RH COMMUNICATION ERROR

DTC DETECTING CONDITION:
- Open or short circuit in harness of side sensor bus (RH).
- Side A/B sensor (RH) or curtain airbag sensor (RH) is faulty
- Airbag control module is faulty.

CAUTION:
- Before diagnosing the airbag system, be sure to turn the ignition switch to OFF, disconnect the ground cable from battery, and wait 20 seconds or more before starting to work.
- When replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and check that the warning light operates properly.
- When inspecting the airbag main harness, disconnect the airbag module connectors and seat belt pretensioners of the driver's and passenger's seats for safety reasons.
- When inspecting the airbag rear harness, disconnect the side airbag module connector, curtain airbag module connector and seat belt pretensioner connector for safety reasons.

WIRING DIAGRAM:

Wiring Diagram:

Step 1-3:

Step 4-7:

Step 8: