Clutch Fluid: Testing and Inspection

CLUTCH: CLUTCH FLUID: ON-VEHICLE INSPECTION; 2013 MY FR-S [03/2012 -]

1. INSPECT CLUTCH FLUID LEVEL

(a) Check the clutch fluid level.





If clutch fluid level is lower than the MIN line, check for leaks and inspect the clutch lines. If necessary, refill the master cylinder reservoir sub-assembly with clutch fluid to the MAX line after repair or replacement.

Fluid:

SAE J1703 or FMVSS No. 116 DOT 3

NOTICE:
When adjusting fluid amount using a dropper or the like, do not use one which was used with liquid petroleum, water, or deteriorated clutch fluid. This may deteriorate seals or fluid, resulting a fluid leak and poor clutch function.