Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT SIDE AIRBAG ASSEMBLY: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

CAUTION:
* The nuts must not be reused.
* Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.
(a) Install the front seat airbag assembly with 2 new nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Engage the 2 clamps.

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD Reassembly

3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY Reassembly

4. INSTALL FRONT SEAT INNER CUSHION SHIELD Reassembly

5. INSTALL FRONT SEAT CUSHION SHIELD Reassembly

6. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side) Reassembly

7. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

8. INSTALL FRONT SEAT ASSEMBLY

Installation

9. PERFORM DIAGNOSTIC SYSTEM CHECK

Reading and Clearing Diagnostic Trouble Codes