Removal

BRAKE SYSTEM (OTHER): BRAKE BOOSTER: REMOVAL; 2013 MY FR-S [03/2012 -]

1. REMOVE INSTRUMENT SIDE PANEL LH

HINT
Use the same procedure for the LH side as for the RH side Removal.

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

3. REMOVE TCM (for Automatic Transmission)

Removal

4. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Removal

5. DISCONNECT VACUUM TUBE CONNECTOR HOSE

(a) Slide the clip and disconnect the vacuum tube connector hose from the brake booster assembly.

6. REMOVE FRONT NO. 1 BRAKE TUBE

(a) Using a union nut wrench 12 mm, disconnect the front No. 1 brake tube from the brake actuator.

(b) Disconnect 2 clips and remove the front No. 1 brake tube.

7. REMOVE FRONT NO. 2 BRAKE TUBE

(a) Using a union nut wrench 12 mm, disconnect the front No. 2 brake tube from the brake actuator.

(b) Disconnect 2 clips and remove the front No. 2 brake tube.

8. REMOVE BRAKE BOOSTER ASSEMBLY

(a) Loosen the push rod clevis lock nut.

(b) Remove the 4 nuts.

(d) Remove the brake booster assembly.