Installation

SUPPLEMENTAL RESTRAINT SYSTEM: STEERING PAD: INSTALLATION

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. INSTALL STEERING PAD





NOTICE:
Do not use a steering pad that has been dropped.

(a) Confirm that the ignition switch is turned to OFF.

(b) Confirm that the negative battery terminal is detached.

CAUTION:
Do not begin the operation for at least 90 seconds after the negative battery terminal has been detached.

(c) Connect the horn terminal.

(d) Connect the airbag connector.

NOTICE:
* Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
* Securely lock the locking button.

(e) Install the steering pad.





(f) Using "TORX" socket wrench T30, tighten the 2 bolts.

Torque : 8.8 Nm (90 kgf-cm, 78 in-lbf)

NOTICE:
Tighten the 2 bolts while holding the steering pad to prevent it moving upward.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

3. INSPECT SRS WARNING LIGHT

Diagnosis System