Removal

AXLE AND DIFFERENTIAL: REAR AXLE HUB: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. LOOSEN ADJUSTING NUT Removal

2. REMOVE REAR WHEEL

3. REMOVE REAR BRAKE DRUM Removal

4. DISCONNECT SKID CONTROL SENSOR WIRE

(a) Using a screwdriver, remove the claw of the connector lock portion and disconnect the skid control sensor wire connector.





5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY

(a) Remove the 4 bolts and the rear axle hub and bearing assembly.