Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE FRONT SEAT ASSEMBLY LH

Removal

4. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR

(a) Remove the screw.





(b) Disengage the guide and remove the seat slide position sensor protector.

5. REMOVE SEAT POSITION AIRBAG SENSOR

(a) Disconnect the seat position sensor connector.





(b) Using a T30 "TORX" socket wrench, remove the screw and the seat position airbag sensor.