Removal

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side): REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE FRONT SEAT ASSEMBLY RH

Removal

4. REMOVE FRONT SEAT CUSHION INNER SHIELD RH

HINT
Use the same procedure as for the LH side Disassembly.

5. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

(a) Remove the front seatback band.

(b) Disengage the front seat inner belt wire harness clamp.

(e) Remove the bolt and the front seat inner belt.