Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Engage the 6 claws and install the front bumper cover.

(b) Tighten the 4 screws.

(c) Install the 5 clips.

(d) Install the pin hold clip.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the RH and LH sides.

2. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

(a) Install the front wheel opening extension pad with the 2 screws.

3. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

HINT
Use the same procedure as for the LH side.