Removal

2ZR-FE IGNITION: IGNITION COIL AND SPARK PLUG: REMOVAL

1. REMOVE NO. 2 CYLINDER HEAD COVER

(a) First, lift up the rear of the No. 2 cylinder head cover to disengage the 2 fittings shown in the illustration.





(b) Next, lift the front of the No. 2 cylinder head cover to disengage the 2 fittings shown in the illustration. Then remove the No. 2 cylinder head cover.

NOTICE:
* Ensure that the rubber grommets remain attached to the No. 2 cylinder head cover.
* If any grommets are attached to the bolts, move them to the No. 2 cylinder head cover.





2. REMOVE IGNITION COIL ASSEMBLY

(a) Disconnect the camshaft timing oil control valve connector.





(b) Disconnect the 4 ignition coil connectors.





(c) Remove the 4 bolts and 4 ignition coils.

3. REMOVE SPARK PLUG

(a) Remove the 4 spark plugs.