Removal

BRAKE CONTROL: BRAKE ACTUATOR: REMOVAL

1. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.

2. REMOVE CENTER COWL TOP VENTILATOR LOUVER Service and Repair

3. REMOVE BATTERY Removal

4. REMOVE BATTERY TRAY

5. REMOVE BATTERY CARRIER Removal

6. REMOVE BRAKE ACTUATOR ASSEMBLY

(a) Release the lock lever and disconnect the brake actuator connector.

Text in Illustration

NOTICE:
Be careful not to allow brake fluid to enter the removed connector.

(b) Using a union nut wrench 10 mm and a union nut wrench 12 mm, separate the 6 brake tubes from the brake actuator.

Text in Illustration

(d) Remove the 3 bolts and brake actuator with bracket.

NOTICE:
Do not damage the brake tubes or wire harness.

7. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY

(a) Remove the 3 bolts and actuator bracket.