Inspection

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSPECTION

1. INSPECT SHIFT LOCK CONTROL ECU (w/o Entry and Start System)





(a) Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage and Resistance:





Text in Illustration





HINT
Do not disconnect the shift lever assembly connector.

If the result is not as specified, replace the shift lock control ECU.

2. INSPECT SHIFT LOCK CONTROL ECU (w/ Entry and Start System)





(a) Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage and Resistance:





Text in Illustration





HINT
Do not disconnect the shift lever assembly connector.

If the result is not as specified, replace the shift lock control ECU.

3. INSPECT TRANSMISSION CONTROL SWITCH





(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the shift lock control unit.

4. INSPECT SHIFT LOCK SOLENOID





(a) Disconnect the shift lock solenoid connector.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





If the result is not as specified, replace the shift lock control unit.