Installation

STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH LH

(a) Attach the claw and guide to install the steering pad switch.

(b) Install the 2 screws.

(c) w/ Shift Paddle Switch:

Connect the connector to the No. 1 switch wire (shift paddle switch).

(d) Connect the connector to the spiral cable sub-assembly.

2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER (w/ Cruise Control System) Installation

5. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

6. INSPECT STEERING WHEEL CENTER POINT

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. INSPECT SRS WARNING LIGHT

Diagnosis System