Installation

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

(a) Install the rear seat inner with center belt with the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

Text in Illustration









NOTICE:
* Make sure that the arrow on the rear seat inner with center belt floor anchor is facing towards the front of the vehicle.
* Do not allow the rear seat inner with center belt floor anchor to overlap the protruding parts.

2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH

(a) Temporarily install the rear seat 3 point type belt together with the rear center seat outer belt floor anchor with the bolt.





(b) Rotate the rear seat 3 point type belt floor anchor until it contacts the anchor stopper.

Text in Illustration





(c) Check that the rear seat 3 point type belt floor anchor is in the lock position as shown in the illustration.

(d) Tighten the bolt.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
* Make sure that the arrow on the rear center seat outer belt floor anchor is facing towards the front of the vehicle.
* Do not allow the rear seat 3 point type belt floor anchor and rear center seat outer belt floor anchor to overlap the protruding parts.

3. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY Installation