Removal

LIGHTING (INT): ROOM LIGHT (for Rear): REMOVAL

1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

(a) Using a screwdriver wrapped with protective tape, detach the 4 claws and remove the lens.





HINT
Tape the screwdriver tip before use.

Text in Illustration





(b) Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.





Text in Illustration





(c) Using a screwdriver, detach the 4 claws and disconnect the room light switch base from the No. 1 room light.





2. REMOVE NO. 1 ROOM LIGHT BULB