Removal

2AR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE ENGINE AND TRANSAXLE

Removal

2. REMOVE MANUAL TRANSAXLE ASSEMBLY (for Manual Transaxle)

Removal

3. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle)

Removal

4. FIX ENGINE ASSEMBLY Removal

5. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle) Removal

6. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle)

7. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)

(a) Using SST, hold the crankshaft pulley.





SST : 09213-54015

SST : 91551-80650

SST : 09330-00021

(b) Remove the 8 bolts and flywheel.





8. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle)

(a) Using SST, hold the crankshaft pulley.





SST : 09213-54015

SST : 91551-80650

SST : 09330-00021

(b) Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.





9. REMOVE REAR ENGINE OIL SEAL

(a) Using a knife, cut off the lip of the oil seal.





Text in Illustration





(b) Using a screwdriver, pry out the oil seal.

NOTICE:
Do not damage the surface of the oil seal press fit hole or the crankshaft.

HINT
Tape the screwdriver tip before use.