Transmitter Battery (w/o Smart Key System)

DOOR LOCK: TRANSMITTER BATTERY (w/o Smart Key System): REPLACEMENT

NOTICE:
Take extra care when handling these precision electronic components.

1. REMOVE TRANSMITTER HOUSING COVER

(a) Twist a screwdriver in the direction of the arrow in the illustration and remove the transmitter housing cover.





Text in Illustration





NOTICE:
Do not forcibly pry open the cover.

HINT
Tape the screwdriver tip before use.

2. REMOVE DOOR CONTROL TRANSMITTER MODULE

(a) Using a precision screwdriver, remove the door control transmitter module.





Text in Illustration





HINT
Tape the screwdriver tip before use.

3. REMOVE TRANSMITTER BATTERY

(a) Detach the 2 claws and remove the transmitter battery cover.





(b) Using a precision screwdriver, remove the battery (lithium battery: CR2016).





Text in Illustration





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may become damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

HINT
Tape the screwdriver tip before use.

4. INSTALL TRANSMITTER BATTERY

(a) Install a new battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.





NOTICE:
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

(b) Attach the 2 claws to install the transmitter battery cover.





5. INSTALL DOOR CONTROL TRANSMITTER MODULE





(a) Install the door control transmitter module.

6. INSTALL TRANSMITTER HOUSING COVER

(a) Install the transmitter housing cover to the transmitter housing case.





(b) Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.