Removal

DOOR LOCK: DOOR CONTROL TRANSMITTER (w/o Smart Key System): REMOVAL

NOTICE:
Take extra care when handling these precision electronic components.

1. REMOVE TRANSMITTER HOUSING COVER

(a) Twist a screwdriver in the direction of the arrow in the illustration and open the transmitter housing cover.





Text in Illustration





NOTICE:
Do not forcibly pry open the cover.

HINT
Tape the screwdriver tip before use.

2. REMOVE DOOR CONTROL TRANSMITTER MODULE

(a) Using a precision screwdriver, remove the door control transmitter module.





Text in Illustration





HINT
Tape the screwdriver tip before use.

3. REMOVE TRANSMITTER BATTERY

(a) Detach the 2 claws and remove the transmitter battery cover.

NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.





(b) Remove the battery (lithium battery: CR2016).





Text in Illustration





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may become damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.