Disassembly

BRAKE: REAR BRAKE: DISASSEMBLY

1. REMOVE REAR BRAKE SHOE KIT

(a) Using SST, separate the shoe return spring from the front brake shoe.





SST : 09921-00010

NOTICE:
Do not damage the wheel cylinder boot.

(b) Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.





SST : 09718-00011

(c) Remove the tension spring.





(d) Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.





(e) Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.





SST : 09718-00011

(f) Using needle-nose pliers, separate the parking brake cable.





2. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER

(a) Remove the automatic adjust lever tension spring and remove the automatic adjust lever.





3. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

(a) Using a screwdriver, remove the C-washer and remove the parking brake shoe lever.





4. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY

(a) Using a union nut wrench, separate the brake tube from the rear wheel brake cylinder.





HINT
Use a container to catch the brake fluid.

(b) Remove the bleeder plug cap.





(c) Remove the bleeder plug.

(d) Remove the 2 bolts and remove the rear wheel brake cylinder.

5. REMOVE REAR WHEEL CYLINDER KIT

(a) Remove the 2 wheel cylinder boots from the wheel brake cylinder.





(b) Remove the 2 pistons.

(c) Remove the compression spring.

(d) Remove the wheel cylinder cup from each piston.