Removal

U241E AUTOMATIC TRANSAXLE: VALVE BODY ASSEMBLY: REMOVAL

1. REMOVE ENGINE UNDER COVER

2. DRAIN AUTOMATIC TRANSAXLE FLUID Removal

3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Removal

4. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

(a) Remove the 3 bolts and remove the valve body oil strainer assembly.





NOTICE:
Perform the operation carefully as some fluid will come out from the oil strainer.

(b) Remove the O-ring from the valve body oil strainer assembly.





5. DISCONNECT TRANSMISSION WIRE

(a) Disconnect the 5 shift solenoid valve connectors.





(b) Remove the bolt and lock plate and separate the ATF temperature sensor.

6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Support the valve body assembly and remove the 17 bolts and the transmission valve body assembly.





NOTICE:
Be careful not to drop the check ball body, spring and accumulator piston.