Installation

2AZ-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL FAN & GENERATOR V BELT





(a) Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.

SST : 09216-42010

09216-04010

NOTICE:
* Be sure to connect SST and the tools so that they are in line during use.
* When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
* After the tensioner is fully retracted, do not apply any more force than is necessary.
2. INSTALL REAR ENGINE UNDER COVER RH