Installation

2AZ-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL THERMOSTAT

(a) Install a new gasket onto the thermostat.





(b) Install the thermostat with the jiggle valve upward.

HINT
The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL INLET WATER

(a) Install the inlet water with the 2 nuts.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

3. CONNECT OUTLET RADIATOR HOSE Installation

4. ADD ENGINE COOLANT Service and Repair

5. INSPECT FOR COOLANT LEAK Testing and Inspection

6. INSTALL NO. 1 ENGINE UNDER COVER