Removal

BRAKE: BRAKE BOOSTER: REMOVAL

1. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.

2. REMOVE WINDSHIELD WIPER ARM COVER Removal

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

5. REMOVE HOOD TO COWL TOP SEAL Removal

6. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

7. REMOVE COWL TOP VENTILATOR LOUVER LH Removal

8. REMOVE FRONT WIPER MOTOR AND LINK Removal

9. REMOVE OUTER COWL TOP PANEL Removal

10. REMOVE AIR CLEANER ASSEMBLY Removal

11. DISCONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle) Removal

12. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY Removal

13. REMOVE BRAKE ACTUATOR ASSEMBLY Removal

14. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL SUB-ASSEMBLY Removal

15. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS Removal

16. REMOVE BRAKE BOOSTER ASSEMBLY





(a) Slide the clip and disconnect the vacuum hose from the check valve.

(b) Remove the 4 nuts and remove the brake booster assembly.





NOTICE:
Do not damage the brake tubes.

(c) Remove the gasket from the brake booster assembly.

(d) Loosen the push rod lock nut and remove the push rod clevis.

17. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY





(a) Remove the vacuum check valve from the brake booster assembly.

(b) Remove the grommet from the brake booster assembly.