Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Engage the 8 claws and install the front bumper cover.





(b) Install the 2 clips.





(c) Tighten the 10 screws.

(d) Install the pin hold clip.





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertically.

HINT
Use the same procedure for the RH side and LH side.

(e) Install the screw.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE





(a) Install the radiator grille with 2 bolts.

(b) Install the 3 clips.

3. INSTALL NO. 1 RADIATOR GRILLE GARNISH





(a) Install the No. 1 radiator grille garnish with the 5 clips.