Automatic Transaxle System - U241E
U241E AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART
If a DTC is displayed during the DTC check, check the circuit listed in the table below.
HINT
* *1: "Comes on" means the Malfunction Indicator Lamp (MIL) illuminates.
* *2: "DTC stored" means the ECM memorizes the trouble code if the ECM detects the DTC detection condition.
* These DTCs may be output when the clutch, brake, gear components, etc., inside the automatic transaxle are damaged.
