Installation

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

CAUTION:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag with the 3 bolts.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

4. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.