Installation

2AZ-FE IGNITION: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL IGNITION COIL ASSEMBLY





(a) Install the 4 ignition coil with the 4 bolts.

Torque : 9.0 Nm (90 kgf-cm, 80 in-lbf)





(b) Connect the 4 ignition coil connectors.

2. INSTALL ENGINE COVER Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.