Removal

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE METER HOOD SUB-ASSEMBLY

(a) Tilt the steering column assembly down as far as possible.

(b) Using a moulding remover, disengage the 9 claws.





HINT

Tape the moulding remover tip before use.

(c) Remove the meter hood sub-assembly.

3. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the screw and disengage the 2 claws.





(b) Disconnect the connectors remove the combination meter assembly.

4. REMOVE COMBINATION METER GLASS





(a) Disengage the 8 claws to remove the combination meter glass.